Autoglym Polar Blast Snow Foam - 2.5 Litres
Autoglym's Polar Blast Snow Foam can be applied via a pressure washer or foam gun as part of the pre-wash process. Polar Blast is designed to cover your vehicle, leaving a rich blanket of foam that clings to your paintwork, gently loosening dirt and heavy bodywork soiling prior to shampooing.
Snow foam reduces the risks of scratches and swirl marks that can be caused by a variety of washing mitts and other cleaning equipment. Shampoo can be substituted for Polar Blast providing the vehicle is not too heavily soiled. Rinse the vehicle with water first to remove the top layer of dirt.
Instructions
- Before using Polar Blast, ensure your vehicle is out of direct sunlight and the bodywork and wheels are cool to the touch.
- A good starting point is 100ml product to 500ml water in your foaming bottle, although, Polar Blast can be used at various other dilutions depending on the density of foam you desire. Adjust your foam gun settings to increase or decrease foam.
- Begin by spraying Polar Blast onto your vehicle, starting at the bottom, ensuring all exterior surfaces are covered, this includes glass and wheels.
- Leave Polar Blast to dwell and loosen dirt for up to 10 minutes but do not allow it to dry on.
- Finally, rinse thoroughly from the bottom up.
£19.80
Was £22.00
Liquid Measurement | 2.5 Litres |
---|
Autoglym's Polar Blast Snow Foam can be applied via a pressure washer or foam gun as part of the pre-wash process. Polar Blast is designed to cover your vehicle, leaving a rich blanket of foam that clings to your paintwork, gently loosening dirt and heavy bodywork soiling prior to shampooing.
Snow foam reduces the risks of scratches and swirl marks that can be caused by a variety of washing mitts and other cleaning equipment. Shampoo can be substituted for Polar Blast providing the vehicle is not too heavily soiled. Rinse the vehicle with water first to remove the top layer of dirt.
Instructions
- Before using Polar Blast, ensure your vehicle is out of direct sunlight and the bodywork and wheels are cool to the touch.
- A good starting point is 100ml product to 500ml water in your foaming bottle, although, Polar Blast can be used at various other dilutions depending on the density of foam you desire. Adjust your foam gun settings to increase or decrease foam.
- Begin by spraying Polar Blast onto your vehicle, starting at the bottom, ensuring all exterior surfaces are covered, this includes glass and wheels.
- Leave Polar Blast to dwell and loosen dirt for up to 10 minutes but do not allow it to dry on.
- Finally, rinse thoroughly from the bottom up.
Autoglym is a British manufacturer of a large range of car care and valeting products. Established in 1965, Autoglym have established themselves well in both the retail and trade indsutries as a very well respected, quality, brand to be trusted.